Filling the Water Tank & Turning On the Machine

Refilling the water tank

1. Lift the water tank lid from the top of the machine.
2. Remove the tank by pulling it straight up out of its housing.
3. Fill with fresh drinking water at room temperature. Do not exceed the MAX mark — 850 ml.
4. Slide the tank back into its housing until fully seated.
5. Replace the lid.

Turning on and warming up

1. Plug the machine into the mains.
2. Press either coffee button (short or long).
3. Both buttons will start flashing blue while the machine heats up — this takes about 1 minute.
4. When both buttons are steady blue, the machine is ready to brew.

Auto-off: the SV826 turns itself off after 15 minutes of inactivity to save energy. Press a button again to wake it.